On the printer

  1. Make sure the X1C is running the latest firmware.
  2. On the printer's screen, select the gear, open General, and enable LAN Mode Liveview.
  3. Note the Access Code under the LAN Only toggle. LAN Only itself does not need to be enabled.

In Scrypted

Install the RTSP Camera Plugin, add a new RTSP camera, and use the following connection details:

Scrypted camera settings
Username: bblp
Password: <the printer access code>
RTSP Stream URL: rtsps://<printer-ip>:322/streaming/live/1
No Audio: checked

Save the camera. The X1C live view should now be available in Scrypted.

Additional reading